HTPXI3730/HTPCI3730:Arbitrary Waveform Generator

 

The HTPXI3730 and HTPCI3730 are 100Ms/s arbitrary waveform generators featuring 43MHz maximum output rate (sine) and up to 256MB of onboard memory. The sample data and instructions of arbitrary waveforms can be edited by users and stored in the onboard memory, and then the data is read into the DAC circuit via the engine produced by onboard waveforms, and finally the waveforms are either successively output through such analog channels as filter, gain and attenuation etc or output directly to the DDC. A signal used as a trigger can be routed out to any destination listed in the Marker Destination specification. In Arbitrary Waveform mode, a single waveform is selected from the set of waveforms stored in onboard memory and generated. In Arbitrary Sequence mode, a sequence directs the HTPXI3730/HTPCI3730 to generate a set of waveforms in a particular order. Users can choose PFI 0/1 trigger or software trigger and use either onboard reference clock or external CLK IN and RTSI input clock.

 

Environment: GB6587.1-5-1986

EMS:      GB17626.2                                                      IEC61000-4-2

GB17626.3                                                      IEC61000-4-3

GB17626.4                                                      IEC61000-4-4

GB17626.5                                                      IEC61000-4-5

GB17626.6                                                      IEC61000-4-6

GB17626.11                                                     IEC61000-4-11

EMI:       GB4824                                                           CISPR 11

 

 

Specifications

HTPXI3730/HTPCI3730

Number of Channels

1

Bus

PXI/PCI

Sampling Rate

100MS/s

Maximum Output Frequency (Sine)

43MHz

DAC Resolution

16bits

Triggering Modes

Single, continuous,

stepped, and burst

Output Impedance

50Ω/75Ω, software selectable

Output Attenuation

0~51dB

Maximum Output

12Vpp

(full range, 50Ω load)

Minimum Output

50mVpp

 (full range, 50Ω load)

Offset Range

25% of amplitude range

Onboard Memory

256MB

Operating Temperature

0°C ~45°C

Storage Temperature

-40°C ~70°C

Operating Humidity

10%~90%, noncondensing

Storage Humidity

5%~95%, noncondensing

Sources

Software;

External, CLK IN

(SMB front panel connector);

External, DDC CLK IN

(DIGITAL DATA & CONTROL front panel connector);

PXI trigger;

RTSI trigger.

 

Ordering Information

Part Name

HTPXI 3730

HTPCI3730

Part Number

21930-1-3

21930-1-1

Remarks

PXI Bus

PCI Bus

 

Hardware Description:   1. CH0        2. External CLK IN     3. PFI1 Connector

4. PFI2 Connector      5. DDC Connector

Layout and Dimensions:

HTPXI3730/HTPCI3730 Front

HTPXI3730 Side

 

Contact the Sales Engineer
<% //关闭数据库连接 PaginationID.DisConnect(); getcmblistID.DisConnect(); %>